ABEJA GEARS / INDUSTRIAL GEAR MANUFACTURING

Screw gears.Resolve the angle.Review the contact.

Screw gears, also called crossed helical gears, connect nonparallel, nonintersecting shafts. Begin with the shaft layout and complete mating pair so geometry, material pairing and operating duty can be reviewed before a manufacturing specification is released.

Crossed helical meshOffset shaftsSliding-contact review
Concept render of two cylindrical screw gears for a crossed helical arrangement.
CONCEPT RENDERCrossed-axis helical gear geometry

Illustrative geometry. Final design, materials, and manufacturing scope are defined by the agreed specification.

01 / GEOMETRY & INTERFACES

Resolve both gears
against the shaft layout.

A crossed helical pair requires its own geometry and duty review. Identify the shaft angle, offset, helix hands, and actual mating members before selecting the production brief.

01 / DESIGN REVIEW

Right-angle crossed-axis pairs

A compact arrangement for transmitting motion between offset shafts at a specified right angle.

Review togetherDefine both helix angles and hands, tooth counts and center distance. Do not assume parallel-axis helical selection rules apply.
02 / DESIGN REVIEW

Other shaft-angle layouts

Review crossed-axis geometry when the machine layout requires a shaft angle other than a right angle.

Review togetherShare an assembly view showing shaft angle, offset and mounting constraints. Verify both members as one pair.
03 / DESIGN REVIEW

Single-gear replacements

For an existing mechanism, matching the remaining gear is the first requirement for a replacement.

Review togetherProvide the mate, tooth geometry and assembly position. Diameter and tooth count alone do not identify a compatible screw gear.

02 / ENGINEERING REVIEW

Different shaft layouts
change the mesh.

Normal tooth geometry establishes compatibility; contact and sliding conditions determine what load and wear review must cover. Include the bearing arrangement and installation settings.

  1. 01

    Match the normal geometry

    Mating screw gears require matching normal module and normal pressure angle. The two helix angles and their hands must also suit the specified shaft arrangement.

  2. 02

    Review contact and sliding

    Crossed helical gears have theoretical point contact with sliding. Evaluate load, speed, material pairing and lubrication rather than borrowing a parallel-axis helical torque rating.

  3. 03

    Include thrust and installation

    Define rotation, power-flow direction and reversals for bearing-load review. Set assembly position, backlash and contact checks before evaluating running behavior.

03 / A QUOTATION YOU CAN COMPARE

Make the RFQ
an engineering brief.

Give engineering and purchasing one set of inputs. Identify open requirements so the quotation can state its assumptions and the agreed manufacturing scope.

Screw Gears project inputs for technical review and quotation
Project inputWhat to shareWhy it matters
Shaft arrangementShaft angle, center distance, offset layout, mounting positions and an assembly drawing.Establishes the crossed-axis geometry and available installation envelope.
Both gear geometriesNormal module, normal pressure angle, tooth counts, helix angles and hands, face widths and any profile shift.Defines compatibility and the required motion ratio.
Shaft interfacesBores or journals, keyways or splines, shoulders, axial retention, datums and drawing revisions.Connects the mesh specification to bearing support and assembly.
Actual operating dutySpeed, running and peak torque, duty cycle, starts, reversals, shock loading and target life.Supports a project-specific review of contact loading and sliding.
Material and lubricationMaterials for both members, heat treatment or hardness, lubricant, temperature and environment.Makes the wear-pairing and maintenance assumptions explicit.
Release requirementsBacklash and contact criteria, required inspection records, sample quantity, annual demand and production approval steps.Aligns quotation, sample validation and repeat supply to one scope.

Do not have a finished drawing yet? Share the application and the information available. Identify what is fixed, what can change, and what still needs to be established.

04 / AGREED ACCEPTANCE EVIDENCE

Define how the gear
will be accepted.

Translate critical requirements into an inspection and validation scope. Agree the standard, characteristics, sampling, and required records before ordering.

EVIDENCE / 01

Mating geometry

Agree the tooth and dimensional measurements needed to identify each gear against the controlled pair specification.

EVIDENCE / 02

Interfaces and datums

Define bore or shaft-fit checks and the datum relationships that locate the teeth in the assembly.

EVIDENCE / 03

Material condition

Specify material identification, heat-treatment and hardness evidence for each member where required.

EVIDENCE / 04

Assembly behavior

Agree contact, backlash and running tests at stated mounting, load, speed and lubrication conditions.

05 / OEM PROGRAM CONTROL

From sample approval
to controlled repeat orders.

Set the release gates your program needs. Keep the drawing, accepted evidence, and change requirements connected as quantities move from samples into production.

01

Clarify the mesh before quotation

Resolve the shaft angle, paired geometry, duty and open drawing questions before selecting a production route.

02

Approve the actual sample pair

Link sample identification and test conditions to both gear revisions and the agreed assembly layout.

03

Define shipment evidence

Agree inspection records, lot identification, pair identification if required, packing and the documents needed for release.

04

Control replacement and changes

Specify interchangeability expectations and approval requirements for proposed changes to geometry, material or process.

START YOUR PROJECT / SCREW GEARS

Specify both gears
and the crossed-axis layout.

Send the assembly view and both tooth specifications. Include actual duty, material pairing, and lubrication so the review can address the working contact rather than an isolated component.

[email protected]

Your starting checklist

  • Shaft angle, offset layout, and center distance
  • Normal module and normal pressure angle
  • Both helix angles, hands, and tooth counts
  • Torque, speed, materials, and lubricant
  • Assembly criteria, quantities, and release evidence
Download RFQ checklist

06 / BEFORE YOU SEND THE DRAWING

Questions that
change the specification.

Resolve the mesh, operating conditions, and acceptance basis before the order is released.

Are screw gears the same as worm gears?

No. Crossed helical screw gears and a worm with its matching worm wheel use different mating geometry. A helical gear should not be treated as an interchangeable worm wheel.

Can the same gear be used in parallel and crossed arrangements?

Some cylindrical helical components can be arranged differently, but compatibility and load capacity must be checked for the actual mesh. A crossed-axis arrangement changes the contact conditions.

Which helix hands should I order?

Provide the intended shaft angle and both gear drawings. Helix hand and angle are part of the pair definition; selecting a hand from one isolated component is insufficient.

Can screw gears be selected for a high-torque drive?

The theoretical point-contact and sliding conditions require careful load and wear review. Share the actual duty so suitability can be assessed rather than assumed from gear size.

What if the existing drawing only says helical gear?

Include the machine's shaft layout and mating gear. Identify normal module, pressure angle, helix angles and hands, and mark any missing data for review before quotation.

Technical references & specification basis

These references explain general gear principles. Product ratings and supplier-specific capabilities in the reference material do not describe ABEJA Gears. The agreed drawing, quotation, and acceptance plan define each order.

Consult